Skip to Content

Epson - Resetting the Lamp Timer

1172 August 14, 2023  Projectors

 

Resetting the Lamp Timer

You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly.
Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage information.
  1. Turn on the projector.
  2. Press the Menu button.
  3. Select the Reset menu and press Enter.

  4. Select Reset Lamp Hours and press Enter. You see a prompt asking if you want to reset the lamp hours.
  5. Select Yes and press Enter.
  6. Press Menu or Esc to exit the menus.

 

https://files.support.epson.com/docid/cpd4/cpd40467/source/maintenance/tasks/resetting_lamp_timer.html
Epson projector Lamp Timer Lamp Timer